Product Data Sheet Show all documents

Kubetplan® WP Tape-200

Termination, fixing and sealing tape for use with the Kubetplan® WP Membrane System

Kubetplan® WP Tape-200 is a PVC based waterproof sealing tape with modified properties for terminations and fixings of Kubetplan® WP membranes.

  • Very good bonding attributes
  • Long-term water resistance
  • Optimized workability, thermally weldable
  • Optimized flexibility, plus tensile strength and multi-axial-elongation
  • Flexible even in cold temperatures
  • Prevents lateral water underflow
Product Data Sheet Show all documents

Usage

As a waterproofing sealing tape that is heat weldable to Kubetplan® WP waterproofing membranes - Series 1100, 2101 and 2110, based on PVC. The Kubetplan® WP Tape-200 is used to connect the Kubetplan® WP membranes to the substrate and itself at edges and terminations, thereby maintaining a high quality watertight seal. It is specialy designed for waterproofing in cross-sections of tunnels with special high performance, secure terminations of the Sikplan® WP Membrane System.  

Advantages

  • Very good bonding attributes
  • Long-term water resistance
  • Optimized workability, thermally weldable
  • Optimized flexibility, plus tensile strength and multi-axial-elongation
  • Flexible even in cold temperatures
  • Prevents lateral water underflow

Packaging

Roll size

200mm (width) × 20m (length)

Colour

Kubetplan® WP Tape-200, homogenous, supplied in rolls

Thickness

2 mm including 0.6mm signal layer
Colour signal layer - white
bottom base layer - black

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Hydrostatic Pressure Resistance Test over 245 Days Kubetplan® WP Tape-200, MFPA, Test report No. B 16.14.047.06
  • Hydrostatic Pressure Resistance Test over 55 Days Kubetplan® WP Tape-200, MFPA, Test report No. B 16.14.047.05
Product Information

Chemical base

Polyvinylchloride (PVC-P)

Thickness

2.00 mm (-5%/+10%)

(EN 1849-2)

Shelf life

18 months from date of production

Storage conditions

Rolls must be stored in their original packaging and in cool and dry conditions at temperatures between +5°C and 35°C. They must be protected from direct sunlight, rain, snow and ice, etc.Do not stack pallets of rolls during transport or storage.
System information

System Structure

The Kubetplan® WP Tape-200 system consists of a modified PVC tape and  Kubetdur®-731 or Kubetdur®-31 CF or Kubetdur-Combiflex® epoxy adhesives.

One grade of the tape is available:

  • Kubetplan® WP Tape-200 (width: 200mm)

Suitable adhesives are: Kubetdur®-731 or Kubetdur®-31 CF including types:

  • Kubetdur®-731
  • Kubetdur®-31 CF (LP)
  • Kubetdur®-31 CF (N)
  • Kubetdur®-31 CF (R)

or the suitable Kubetdur-Combiflex® adhesives types:

  • Kubetdur-Combiflex® adhesive (N)
  • Kubetdur-Combiflex® adhesive (R)

Note: This system configuration as described must always be fully complied with and must not be changed.

Ancillary Products:

  • Kubetplan® WP Membrane Systems
  • Sarna Seam Cleaner

Compatibility

Kubetplan® WP Tape-200 is compatible with Kubetplan® WP 1100 Series, Kubetplan® WP 2101 Series and Kubetplan® WP 2110 Series
Technical Information

Tensile Strength

> 14 N/mm2

(EN ISO 527)

Elongation

≥ 300% (machine / cross direction)

(EN ISO 527)

Tear Strength

≥ 42 kN/m (V = 50mm/min)

(ISO 34 Method B)

Reaction to Fire

Class E

(EN ISO 11925-2 / EN 13501-1)

Service temperature

-10°C min. / +35°C max.

Application

Application Information

Ambient Air Temperature

+5°C min. / +55°C max.

For installation below +5° ambient temperature, special measures are required in accordance with relevant national regulations and Kubet guidelines.
Consumption

Consumption

~1.0 kg/m of Kubetdur®-731

Note: The consumption is dependent on substrate surface roughness, size of exposed aggregate, thickness required etc.
Application steps

SUBSTRATE QUALITY

The substrate must be mechanically prepared e.g. by blast-cleaning, to be free from any cement laitance, damaged concrete, old surface treatments or coatings, then all loose or friable particles must be removed to achieve a contaminant free, open textured surface.The substrate must be dry or maximum mat damp. The substrate temperature must be min 3 Kelvin above dew point conditions and condensation on the freshly applied material must be avoided.Application of adhesivePlease refer to the relevant Product Data Sheet for the specific adhesive that is to be used.

 

Documents